Table of Contents
Advertisement
R
R R
H. Frequently Asked Questions
ISSUES
1. Metallic noise.
.
Ash buildup on glass.
.
Glass has turned dirty.
4.
Fire has tall flames with black tails and is lazy.
5.
Smokey start-up or puffs of smoke from the airwash. 5. Either the firepot is dirty or there is too much fuel at
6.
Large flame at start-up.
January 28, 2010
1. Noise is caused by metal expanding and contracting as
it heats up and cools down, similar to the sound pro-
duced by a furnace or heating duct. This noise does not
affect the operation or longevity of your appliance.
. This is normal. Clean the glass.
. Excessive build up of ash. The lower burn settings will
produce more ash, the higher burn settings produce
less. The more it burns on low the more frequent clean-
ing of the glass is required.
4. The feed rate needs to be reduced or the firepot needs
cleaning. Heat exchanger or exhaust blower needs
cleaning.
start-up and not enough air. Close down feed rate 1/4
(6mm) inch at a time until this no longer happens.
6. This is normal. Flame will settle down once the fire is
established.
CAUTION
Odors and vapors released during initial operation.
• Curing of high temperature paint.
• Open windows for air circulation.
Odors may be irritating to sensitive individuals.
250-7251H
Castile Pellet Insert
SOLUTIONS
Page 7
Advertisement
Table of Contents
