Table of Contents
Advertisement
Number of messages (or during
playback, message number
currently playing).
ANNC.
RECORD
Press
PLAY/
STOP
to begin or end message
playback.
1.
Press
PLAY/
"You have [XX] new
messages and [XX]
old messages."
Message playback begins.
See options at right.
2.
Press
/STOP to
PLAY
end message playback.
NOTES:
1. If F and the total message
number is flashing in the
message window, memory
is full. You will have to
delete some messages
before new ones can be
received.
2. The maximum record time
can be more than 11
minutes.
3. If you receive calls when
the memory is full, the
telephone will ring 10
times, then answer and
announce "Memory is
full, enter the remote
access code."
4. New (unheard) messages
cannot be deleted.
Answering system
Message playback
Press
system announces the number of messages, then
begins playback.
If you have new messages, you will hear only the
new messages (oldest first). If there are no new
messages, the system will playback all messages
(oldest first).
Announcements
• When playback begins, you will hear the total
number of messages.
STOP
• Before each message, you will hear the day
and time it was received.
• After playing all new messages, you will hear
"End of new messages." You will hear "End
of messages" after the answering system has
finished the playback of all messages. If the
system has less than five minutes of recording
time left, you will hear the estimated time
remaining.
Options during playback
• Press VOL button to adjust the speaker
volume.
• Press SKIP to skip to next message.
• Press
currently playing. Press twice to hear previous
message.
• Press
played back.
• Press
Delete all messages
To delete all old messages, press
when the phone is not in use.
PLAY/
to listen to messages. The
STOP
REPEAT to repeat the message
DELETE to delete the message being
/STOP to stop playback.
PLAY
34
DELETE twice
Advertisement
Table of Contents
