Table of Contents
Advertisement
ANNC.
RECORD
Message counter
Answering system
Message counter displays
When the answering system is idle, the message
counter displays the total number of answering
system messages. See the list below for
explanations of other displays in this counter.
Message counter displays
0
0 (flashing)
1-95
1-95 (flashing)
10-99
1-99 (counting)
99 (flashing)
F (flashing)
--
-- (flashing)
2, 4, 6, S
1-8
HI, LO, OF
36
No messages.
The clock needs to be set (page 31).
Total number of messages and memos,
or message number currently playing.
Total number of messages and memos.
The number flashes when there are new
(unreviewed) messages.
If the telephone loses power, after power
is restored, the number in the message
counter will flash (even if you have only
old messages) to indicate the clock needs
to be set.
Current remote access code while setting
(page 33).
Elapsed time while recording a memo
(page 35) or announcement up to 90
seconds (page 32).
Memo recording time has exceeded the
maximum counter capacity of 99 seconds.
Memory is full. Messages must be deleted
before new messages can be received.
System is answering a call, being accessed
remotely, or the clock is being set, or a
handset is on a call
System is being setup or initialized.
Current number of rings-to-answer while
setting this feature (page 33).
Displayed for two seconds while telephone
base speaker volume is being adjusted.
Displayed for two seconds while telephone
base ringer volume is being adjusted.
Advertisement
Table of Contents
