Table of Contents
Advertisement
Available languages
Available languages
3. PREPARE THE INSTALLATION
Make sure that the following items are included:
- Range hood
- Accessories:
• Filters
• Bag of parts including:
(4) lock nuts, (1) wire clamp, (8) 1/2" double thread screws, (2) wire connectors,
(2) 1/2" standard screws, (6) 3/8 screws.
Parts sold separately:
- Interior blower Model P5 includes blower, rough-in kit, flow deviator and 3 1/4" x 10" adapter
- Interior blower Model P8 includes blower, rough-in kit, flow deviator and 3 1/4" x 10" adapter
and 3 1/4" x 14" adapter
- Exterior blower Model 331H, 332H, 335 or 336
- Exterior blower rough-in kit Model 332KR (required for all exterior blower models)
- Halogen lights (120V, 50W, PAR 20)
- Heat lamps (120V, IR 175W, PAR 38)
- Backsplash (optional)
- Baffle filters (optional)
- Transitions, duct, elbows, dampers, wall and roof caps. Refer to page 3 for a complete list of venting
options and model numbers.
NOTE: For cabinets with recessed bottom, attach wood filler strips (not included) on each sides, as
shown below. Use two (2) 2-inch wide strips for 30'' wide hoods, and four (4) 2-inch wide strips for
wider hoods, cut to length. See below for wood filler strip locations.
H
OOD
WIDTHS
30''
36''
42''
48''
4. INSTALL BACKSPLASH (OPTIONAL)
Backsplash must be installed before the hood shell because the hood shell covers the backsplash top
mounting screws. In order to be able to install the backsplash, make sure you have at least 18'' clearance
between bottom of hood and range control panel or cooktop. (See instructions packed with backsplash.)
5. SELECT BLOWER OPTION (EXTERIOR OR INTERIOR)
INTERIOR BLOWER: Follow all subsequent steps of this manual.
EXTERIOR BLOWER: Refer to instructions packed with exterior blower and follow steps 7, 10, 13, 14
and 15 of the present manual.
L
OCATIONS
A
B
C
2''
/
/
N
A
N
A
2''
4 1/2''
4 1/2''
2''
7 1/4''
8 1/4''
4''
10 1/4'' 11 1/4''
- 5 -
A
B
HD0079
A
C
Advertisement
Table of Contents
