Introduction - Kohler 8.5RES Operation And Installation

This manual provides operation and installation
instructions for model 8.5RES and 12RES generator
sets equipped with the Kohlerr Advanced Digital
Control (ADC 2100).
Information in this publication represents data available
at the time of print. The manufacturer may provide this
manual for models not listed on the front cover. Kohler
Co. reserves the right to change this publication and the
products represented without notice and without any
obligation or liability whatsoever.
Read this manual and carefully follow all procedures
and safety precautions to ensure proper equipment
operation and to avoid bodily injury. Read and follow the
Safety Precautions and Instructions section at the
beginning of this manual. Keep this manual with the
equipment for future reference.
The generator set is approved for use in stationary
applications in locations served by a reliable utility
power source.
The equipment service requirements are very important
to safe and efficient operation. Inspect the parts often
and perform required service at the prescribed intervals.
Obtain service from an authorized service distributor/
dealer to keep equipment in top condition.
Nameplate
The following illustration shows a typical generator set
nameplate. Copy the model, serial, and specification
numbers from the nameplate into the spaces provided in
the product information section on the inside front cover
of this manual. See Section 1.5, Service Views, for the
nameplate location.
TP-6195 1/04
EPA and California Emission
Certification
An engine or generator set with the following
identification labels is certified to meet Small Off-Road
Engine emission standards for EPA/CARB. All model
8.5RES and 12RES generator sets with multi-fuel
systems are emission-certified.
Figure 1 Emissions Label, 8.5RES Engine (CH20)
Figure 2 Emissions Label, 12 RES Engine (CH740)

Introduction

tp6195
tp6195
Introduction i