Storing Stations In Memory - JVC KD-LX100 Instructions Manual

2
Press and hold A ))1 or 144 v until
"M" (manual) starts flashing on the
display
3 Tune into a station you want while "M"
is flashing
Press h -1 to tune into
stations of higher frequencies
L
I\
Tr Press IH4 v to tune into
p,
'\\
\.
,./ '.
stations of lower frequencies
%\ \
l
If you release your finger from the button,
the manual mode will automatically turn off
after 5 seconds
l
If you hold down the button, the frequency
keeps changing until you release the button
When an FM stereo broadcast is hard to
receive:
1
Press MODE while listening to an FM stereo
broadcast (the ST indicator lights up while
receiving an FM stereo broadcast)
2 Press MONO, while "MODE" is still on the display,
so that the MO indicator lights up on the display
The sound you hear becomes monaural but the
reception will be improved (the ST indicator goes
off)
Each time you press the button, the MO indicator
lights up and goes off alternately
Storing stations in memory
You can use one of the following two methods to
store broadcasting stations in memory
l
Automatic preset of FM stations SSM (Strong-
station Sequential Memory)
l
Manual preset of both FM and AM stations
FM station automatic weset: SSM
You can preset 6 local FM stations in each FM band
(FMl, FM2 and FM3)
I
2
Select the FM band (FMl-3) you want
to store FM stations into.
q
Press SOURCE to select
tuner as the source
q
If necessary, press
BAND repeatedly to
select the band
Each time you press the button, the band
changes as follows
r' FM1 -FM2-FM3-
i:
1
Press and hold both buttons for more
than 2 seconds.
-- -- 4 5:':
r 7
.- -- i j
"SSM" appears, then disappears when automatic
preset is over
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FMl, FM2 or FM3)
These stations are preset in the number buttons
- No 1 (lowest frequency) to No 6 (highest
frequency)
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in