Playing A Cd Text; Prohibiting Cd Ejection - JVC KD-LX100 Instructions Manual

To play back only intros (Intro Scan)
You can play back the first 15 seconds of each
track sequentially
1
Press MODE while playing a CD
"MODE" appears on the lower part of the
display, and the number buttons can work as
different function buttons
2 Press INT (Intro), while "MODE" is still on the
display
Each time you press the button, CD intro scan
mode turns on and off alternately
Track number of the currently playing track
I
Playing a CD Text
In a CD Text, some information about the disc (its
disc title, performer and track title) is recorded
You can show these disc information on the
display
Select text display mode while playing a
CD Text
When the intro scan mode is turned on, "INT"
appears on the display for 5 seconds and the
track number flashes
Prohibiting CD ejection
You can prohibit CD ejection and can lock a CD
in the loading slot
While pressing SOURCE, press and hold OFF/A
for more than 2 seconds
"NO EJECT" flashes on the display for about 5
seconds, and the CD is locked and cannot be
ejected
Note:
If YOU press OFF/= while CD ejectiotl is prohibited, the
control panel moves down, hut the CD cannot be ejected
("NO EJECT" appears on the display)
To move up the displa,) panel, press h b+~ 01
1-v
To cancel the prohibition and unlock the CD,
press and hold OFF/I. for more than 2 seconds
again, while pressing SOURCE
"EJECT OK" flashes on the display for about 5
seconds, and the CD is unlocked
Each time you press the button, the display
changes as follows
i
Disc Title / Performer
1
Track Title
I
Current track no. and
Elapsed playing time
I
Notes
The display shows up to 10 characters at one time
and scrolls if there are more than 10 characters
See also "To select the scroll mode - SCROLL" on
page I9
When yea press DISP while playing a conventional
CD, "NO NAME" appears for the disc title/
performer and the track title
13