Finishing; Door Removal & Installation - Napoleon GD36NTR Installation And Operation Instructions Manual

24
DOOR REMOVAL & INSTALLATION
FLANGE
HOOD
UPPER LOUVRE
DOOR LATCH
a
FIGURE 44a-d
GVFL LOUVRE INSTALLATION
HOOD
BRACKET
SLOT
b
LOUVRE
c
LOWER LOUVRES
(VALVE CONTROL DOOR)
HINGE SCREEN
d
Position the hinge screen into place and with the control
door open, secure to the firebox using three screws.
Optional plated door trim, and arched door facia are avail-
able at your local Napoleon dealer.
W415-0210 / G / 12.10.04

FINISHING

DOOR OPENING AND
CLOSING: The upper lou-
CLIP
vres must be removed to
allow the door to be opened
or closed. To access the
lower door latch, open the
valve control door. Release
the top and bottom door
latches, located at the right
side of the door.
TO INSTALL THE UPPER
LOUVRES: Insert the up-
per louvres into the slots
on both brackets. Press
the top flange of the hood
into the four clips located
along the top of the unit as
shown.
TO INSTALL THE LOWER
LOUVRE ASSEMBLY: At-
tach each hinge to the fire-
box with 2 screws.
L36 LOUVRE INSTALLATION
FIGURE 45 a-c
B
C
A
CLIPS HOOD
Attach the hood by pressing the
top flange into the clips along
the top of the louvre opening.
Secure using a screw through
FLANGE
the centre slot.
C E N T R E
S L O T
UPPER LOUVRES
Insert the louvre tabs into the
slots located at the top left and
S L O T
right corners of the unit.
TA B
B
C
LOWER LOUVRES
HINGE
Insert the hinge clips into the
S L O T
CLIP
slots located at the bottom left
and right corners of the unit.
To remove the louvres, pull the
back tabs of the clips forward,
while pushing the louvre assem-
bly back. Lift the clip.
A