Sony DCR-PC6E Service Manual page 50

Superimposing a still image in a
"Memory Stick" on a moving
picture – MEMORY MIX
Recording a superimposed
image to tape
Before operation
•Insert a tape for recording into your camcorder.
•Insert a "Memory Stick" recorded with still
images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) In the standby mode, press FN and select
PAGE2.
(3) Press MEM MIX. The last recorded or last
composed image appears on the lower part of
the screen as a thumbnail image.
(4) Press –/+ on the right lower corner of the
screen to select the still image which you want
to superimpose.
– : to see the previous image
+ : to see the next image
(5) Press a desired mode. The still image is
superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the
screen to adjust the effect, then press OK
to return to PAGE2.
(7) Press EXIT to return to FN.
(8) Press START/STOP to start recording.
3
2
4,5
FN
6
176
Superimposing a still image in a
"Memory Stick" on a moving
picture – MEMORY MIX
Recording a superimposed
image to "Memory Stick" as a
still image
Before operation
Insert a recorded "Memory Stick" into your
camcorder.
(1) Set the POWER switch to MEMORY.
Make sure that the LOCK switch is set to the
right (unlock) position.
(2) In the standby mode, press FN and select
PAGE2.
(3) Press MEM MIX. The last recorded or last
composed image appears on the lower part of
the screen as a thumbnail image.
(4) Press –/+ on the right lower corner of the
screen to select the still image which you want
to superimpose.
– : to see the previous image
+ : to see the next image
(5) Press a desired mode. The still image is
superimposed on the moving picture.
(6) Press –/+ on the left lower corner of the
screen to adjust the effect, then press OK
to return to PAGE2.
(7) Press EXIT to return to FN.
(8) Press PHOTO deeply. Recording is completed
when the bar scroll indicator disappears. The
image displayed on the screen will be
recorded on a "Memory Stick".
3
2
4,5
FN
6
178
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1
POWER LOCK
MEM MIX
OFF MCCAM OVER– OK
Still image/
MEM LUMI LAP
CAMCM MCCAM
M I X CHROM CHROM
100–0001
– +
MEM MIX
OFF OK
– +
M. LUMI
100–0001
– + – +
MEM MIX
OFF OK
– +
M. LUMI
100–0001
– + – +
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
1
POWER LOCK
MEM MIX
OFF MCCAM OK
LUMI Still image/
MEM
CAMCM MCCAM
M I X
CHROM CHROM
100–0001
– +
MEM MIX
OFF OK
– +
M. LUMI
100–0001
– + – +
MEM MIX
OFF OK
– +
M. LUMI
100–0001
– + – +
Superimposing a still image in a
"Memory Stick" on a moving
picture – MEMORY MIX
Items to adjust
M. CHROM The colour (blue) scheme of the
area in the still image which is to
be swapped with a moving
picture
M. LUMI The colour (bright) scheme of the
area in the still image which is to
be swapped with a moving
picture
C. CHROM The colour (blue) scheme of the
area in the moving picture which
is to be swapped with a still
image
M. OVERLAP No adjustment necessary
The fewer bars there are on the screen, the
stronger the effect.
To change the still image to be
superimposed
Press –/+ on the right lower corner before step 6.
To cancel MEMORY MIX
Press OFF to return to PAGE2.
Note
You cannot change the still image to
superimpose in the memory overlap mode. Once
cancel the memory overlap mode to change the
still image.
To press PHOTO button in step 8
You can record a still images on a tape.
Superimposing a still image in a
"Memory Stick" on a moving
picture – MEMORY MIX
Items to adjust
M. CHROM The colour (blue) scheme of the
area in the still image which is to
be swapped with a moving
picture
M. LUMI The colour (bright) scheme of the
area in the still image which is to
be swapped with a moving
picture
C. CHROM The colour (blue) scheme of the
area in the moving picture which
is to be swapped with a still
image
The fewer bars there are on the screen, the
stronger the effect.
To change the still image to be
superimposed
Press –/+ on the right lower corner before step 6.
To cancel MEMORY MIX
Press OFF to return to PAGE2.
1-41
177
179