Sony DCR-PC6E Service Manual page 44

Using a "Memory Stick"
– introduction
3~6
FN
In the memory camera
mode/
PAGE1 PAGE2 PAGE3 EXIT
SPOT
METER
MENU PLAY INDEX EXPO–
SURE
PAGE1 PAGE2 PAGE3 EXIT
2
LCD PLAY INDEX MEM
BRT MIX
PAGE1 PAGE2 PAGE3 EXIT
SELF PLAY INDEX VOL
TIMER
To execute settings
Press EXEC or OK.
To cancel settings
Press OFF to return to PAGE1/PAGE2/
PAGE3.
To return to FN
Press EXIT.
152
Using a "Memory Stick"
– introduction
Selecting still image quality
mode
You can select image quality mode in still image
recording. The default setting is FINE.
(1) Set the POWER switch to MEMORY or VCR.
Make sure that the LOCK is set to the right
(unlock) position.
(2) Press FN to display PAGE1.
(3) Press MENU, then select STILL SET in
the menu settings, then press EXEC (p. 134).
(4) Select QUALITY with r/R to set a desired
image quality, then press EXEC.
2
FN
3
MEMORY SET EXIT
STILL SET
PIC MODE SINGLE
QUALITY
EXEC RET.
To return to FN
Press EXIT.
Image quality settings
Setting Meaning
FINE Use this mode when you
(Indicator: FINE) want to record high
quality images. The
image is compressed to
about 1/6.
STANDARD This is the standard
(Indicator:STD) image quality. The image
is compressed to about
1/10.
154
1
LOCK
POWER LOCK
In the memory camera In the memory playback
mode (still image)/ mode (still image)/
– +
PLAY INDEX FN CAM INDEX FN
(1)
in
(2)
(3)
(4)
r R
1
LOCK
POWER LOCK
4
MEMORY SET FINE EXIT
STILL SET
PIC MODE
FINE
QUALITY
STANDARD
REMAIN
23
EXEC RET.
Using a "Memory Stick"
– introduction
Notes
•When using the touch panel, press operation
buttons with your thumb supporting the LCD
screen from the back side of it or press those
buttons lightly with your index finger. Do not
press them with sharp objects such as pens.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD
screen lightly to make it appear. You can
control the display with DISPLAY/TOUCH
PANEL on your camcorder.
•When operation buttons do not work even if
you press them, an adjustment
(CALIBRATION) is required (p. 237).
When executing each item
The green bar appears above the item.
If the items are not available
The colour of the items changes to grey.
Touch panel
You can operate with the touch panel using the
viewfinder (p. 82).
Press FN to display the following buttons:
In the memory camera mode
PAGE1 MENU, PLAY, INDEX,
SPOT METER, EXPOSURE
PAGE2 LCD BRT, PLAY, INDEX,
MEM MIX
PAGE3 SELFTIMER, PLAY, INDEX,
VOL
In the memory playback mode
PAGE1 MENU, CAM, INDEX, DELETE,
,
+ –
PAGE2 LCD BRT, CAM, INDEX,
PB ZOOM, + , –
PAGE3 DATA CODE, CAM, INDEX,
+ , –
Using a "Memory Stick"
– introduction
Note
In some cases, changing the image quality mode
may not affect the image quality, depending on
the types of images you are shooting.
Differences in image quality mode
Recorded images are compressed in JPEG format
before being stored in memory. The memory
capacity allotted to each image varies depending
on the selected image quality mode. Details are
shown in the table below. (The image size is 640
× 480, regardless of image quality mode. The data
size before compression is about 600 KB.)
Image quality mode Memory capacity
FINE (FINE) About 100 KB
STANDARD (STD) About 60 KB
Image quality mode indicator
The image quality mode indicator is not
displayed during playback.
1-35
+ –
+ –
–
+
153
×
155