Product Features; High Elevations; Gas Pressures; Gas Specifications & Orifice Sizes - Monessen Hearth HDV500NV/PV Installation And Operating Instructions Manual

PRoDuCt FeAtuReS

PRoDuCt SPeCIFICAtIoNS
•
This appliance has been certified for use with either
natural or propane gas. See appropriate data plates.
•
This appliance is not for use with solid fuels.
•
The appliance is approved for bedroom or bedsitting
room installations.
•
The appliance must be installed in accordance with local
codes if any. If none exist use the current installation
code. ANSI Z3.1/NFPA 54 in the USA, CSA B149 in
Canada.
•
This appliance is mobile home approved.
•
The appliance must be properly connected to a venting
system.
•
The appliance is not approved for closet or recessed
installations.
Do not remove insulation board.

HIGH eleVAtIoNS

Input ratings are shown in BTU per hour and are certified
without deration for elevations up to 4,500 feet (1,370
m) above sea level.
For elevations above 4,500 feet (1,370 m) in USA,
installations must be in accordance with the current
ANSI Z3.1/NFPA 54 and/or local codes having juris-
diction.
In Canada, please consult provincial and/or local authori-
ties having jurisdiction for installations at elevations
above 4,500 feet (1,370 m).

GAS PReSSuReS

Inlet Minimum
Inlet Maximum
Manifold Pressure
56D3048
Natural Propane (LP)
4.0" w.c. 11.0" w.c.
10.5" w.c. 13.0" w.c.
3.5" w.c. 10.0" w.c.
HDV Series Direct Vent Gas Fireplace
Insulation
Board
Hood
Hi/Lo Knob
Off/Pilot/On Knob
On/Off/RS Switch
Ignitor
Figure 1 - HDV500 Fireplace
(Millivolt Unit Shown - Also Available with Signature
Command System)
GAS SPeCIFICAtIoNS & oRIFICe SIZe
Max.
Input
Model Fuel Btu/h
HDV500NV Nat. 41,000
HDV500PV LP 40,000
HDV500NSC Nat. 41,000
HDV500PSC LP 40,000
1/"
Nailing
Flange
FP463
Optional Remote
Blower
Receiver
Control
FP2463
HDV features
Front
Min. Burner Burner
Input orifice
Btu/h Size
8,000 .30 mm
3,000 #55
8,000 .30 mm
3,000 #55
5/8"
Nailing
Flange
1/"
Nailing
Flange
Rear
orifice
Size
#37
#53
#37
#53
5