Floor Brick Installation; Log And Rockwool Installation - Monessen Hearth HDV500NV/PV Installation And Operating Instructions Manual

BRICK, RoCK Wool & loG INStAllAtIoN

FlooR BRICK INStAllAtIoN

Install floor brick before installing logs or rock wool.
1. Remove floor brick from packaging.
. Put left and right brick pieces together as shown in
Figure 58.
3. Match two () firebox tabs with two () slots on bottom
of brick. Figure 58
4. Push brick down until it makes contact with bottom of
firebox.
Note: Remove floor brick to install brick walls. Remove
floor brick for cleaning.
INStAll loGS AND RoCK Wool
(eMBeR MAteRIAl) IN FIReBox
1. Carefully remove logs from wrapping.
. Remove glass frame. Refer to Glass Frame
Removal, Page 42.
3. Break rock wool into dime-sized pieces. Cover
rear burner completely with rock wool. On front
burner, only cover the ports. Do not exceed 1/"
depth of coverage. Figure 59
56D3048
Slots
Floor
Brick
Firebox Tabs
Figure 58 -
Installing Floor Brick
Rock Wool Covering
Only the Ports in the
Front Burner
Figure 59 -
Place Rock Wool
LG686
HDV rock wool
HDV Series Direct Vent Gas Fireplace
FP2486
install floor brick
Rock Wool Covering
Entire Back Burner
FP486
LG686
43