Remote Wall Mounted Switch - Millivolt - Monessen Hearth HDV500NV/PV Installation And Operating Instructions Manual

HDV Series Direct Vent Gas Fireplace
ReMote WAll MouNteD SWItCH FoR MIllIVolt VAlVeS oNly
A remote wall switch and up to fifteen (15) feet of 18 Ga. wire may be used with this appliance.
Attach the wall switch in a junction box at the desired location on the wall. Figure 44. Do not extend
beyond the wall switch wire length provided.
Note: Extended lengths of wire may cause the fireplace not
to function properly. Longer length of wire is permitted if the
wire is made out of larger gauge (diameter) wire. Always check
with local code.
PILOT HI
TH
TP
TH/TP
Figure 44 -
Wiring Diagram for Wall Switch
(Millivolt Units Only)
30
ON RS
OFF
FP2469
HDV wiring
eleCtRICAl INStAllAtIoN - MIllIVolt
Do not connect wall switch to (110 V)
circuit.
OPTIONAL REMOTE
WALL SWITCH
ON
OFF
OPTIONAL REMOTE
WALL SWITCH
ON
OFF
56D3048