Introduction; Abstract; Features - Fujitsu SK-91465X-100PMC User Manual

1 Introduction

1.1 Abstract

The SK-91465X-100PMC is a multifunctional evaluation board for the Fujitsu 32-bit FR60
Flash microcontroller series MB91F465XA.
It can be used stand-alone for software development and testing or as a simple target board
to work with the emulator system.
The board allows the designer immediately to start software development before his own
final target system is available.

1.2 Features

Supports Fujitsu's MB91F465XA MCU with embedded FlexRay interface in LQFP100
package
Can be used with the MB2198 Emulator System with the Socket Adapter Board
EMA-MB91F465X-NLS-100M20 and the Adapter Board EMA-MB91V460A-00x
together with the MB91V460A-100 FlexRay extension board
12V unregulated external DC power supply
5V and 3.3V onboard voltage regulators
Power-LEDs for all supply voltages
Onboard voltage supervisor monitors both supply voltages
In-Circuit serial Flash programming
All resources available for evaluation
All MCU pins routed to edge connectors
4 MHz main crystal
32 kHz crystal for sub clock operation
Two RS232 or LIN, one RS232, two CAN and two FlexRay interfaces (Channel A, B)
are usable simultaneously
Supports Power switching via FlexRay transceiver
8 User LEDs
optional: alphanumeric standard LC-Display connectable instead of LEDs
Reset button, Reset LED
6 User buttons
This board must only be used for test applications
in an evaluation laboratory environment.
UG-910056-11
SK-91465X-100PMC User Guide
Chapter 1 Introduction
- 6 - © Fujitsu Microelectronics Europe GmbH