MHSC DIRECT VENT MLDV500 Installation And Operating Instructions Manual page 50

MLDV Series Gas Fireplace
6. Place log #5 by matching the rectan-
gular notch on the bottom of the log
with the rectangular protrusion on log
#, then set the notch on the bottom
of this log over the very far left tong
on the grate. Figure 69
Figure 69 -
Install Log #5
Log #6
8. Place log #7 between the second
and third right tong on the grate
as shown in Figure 71.
Figure 71 -
Install log #7
50
Log #5
LG548
MLDV log 6
7. Place log #6 at an angle over log #5 toward
LG547
the back by matching the rectangular notch
MLDV log #5
on the bottom of this log with the rectangu-
lar protrusion on log #5. Then, set the notch
located on the bottom of this log toward the
back over the metal bracket located to the
left side of the burner. Figure 70
Figure 70 -
Install Log #6
LG548
LG549
MLDV log #7
LOG INSTALLATION
Log #7
LG547
LG549
75D0004