Operating Instructions; To Turn Off Gas To Appliance - MHSC DIRECT VENT MLDV500 Installation And Operating Instructions Manual

OPERATING INSTRUCTIONS - SIGNATURE COMMAND
1. STOP! Read the safety information above.
. This appliance is equipped with an ignition device which automatically lights the burner. Do not try to
light the burner by hand.
3. With five (5) minutes to clear out any gas. Then smell for gas, including near the floor. If you smell gas,
STOP! Follow "B" in the safety information on page 38. If you do not smell gas, go to next step.
4. Press the master switch to the "ON" (-) position. Within eight (8) seconds it will beep once. This indi-
cates the system is ready.
5. Press "ON " button. Sparker will spark and pilot flame will light.
6. Once pilot flame is established, the main burner flame will light automatically.
7. If the pilot will not stay lit after several tries, turn the master switch to "OFF" and call your service
technician or gas supplier.
OFF
FP1913
Switch box
8/08
1. Turn master switch to "OFF".
. Turn off all electrical power to the appliance if service is to be performed.
75D0004

OPERATING INSTRUCTIONS

OFF
ON
Command Center

TO TURN OFF GAS TO APPLIANCE

Master
Switch
ON
MLDV Series Gas Fireplace
FP1914
Pilot w sparker
8/08
43