Wall Shield Installation - Jøtul GF 100 DV II Installation And Operation Instructions Manual

or
Figure 13. Horizontal Termination with Vertical Rise.
Figure 14. Termination Clearance to overhangs

Wall Shield Installation

The decorative Wall Shield, included in the Miscellaneous
Hardware bag, is used to obscure the vent hole in the
wall in installations vented directly off the rear of the
stove. Follow this procedure:
1. Remove the top two 1/4" hex head screws from the
rear shroud of the stove.
2. Align the holes in the wall shield with the holes in the
rear shroud.
3. Secure the wall shield to the stove with the two 1/4"
hex head screws. See fig. 16.
Figure 15.
Wall Shield installation.
13