Table of Contents
Advertisement
Sound Skip Check Result Display Mode
This set can display the count of errors that occurred during the
playing for checking.
• Setting method of sound skip check result display
mode
1. Set the test mode (see page 9).
[VOL+]
2. Press the
key or press the
commander, and then the playing sound skip check result dis-
play mode becomes active where the LCD displays the fol-
lowing.
Remote commander LCD display
000
P * *
Total count of play
system errors (hex.)
3. Each time the
>
key is pressed, the display item moves down
by one as shown below. Also, if the
display item moves up by one.
Playing sound skip
result display
000 P * * R * *
000 E I B * *
000 S t a t * *
000 A d r s * *
000 B E m p * *
000 # # # # # #
: Total play errors (hex.)
P**
: Counter of sound skip check each item (hex.)
**
######: 6-digit address where sound was skipped last (hex.)
• Cause of sound skip error
Cause of error
EIB
Stat
Play
Adrs
BEmp
4. To quit the sound skip check result display mode and to return
to the test mode (display check mode), press the
key on the remote
>
.
key is pressed, the
Description of error
Sound error correction error
Decoder status error
Address access error
Buffer is empty
key.
x
Key Check Mode
This set can check if the set and remote commander function nor-
mally.
• Setting method of key check mode
1. Set the test mode (see page 9).
[VOL-]
2. Pressing the
key or
mander for several seconds (about 3 seconds) activates the key
check mode. (At the last two digits, AD value of remote com-
mander key line is displayed in hexadecimal)
3-color info-LED light in red.
Remote commander LCD display
000
**: AD value of the remote commander key
(hexadecimal 00 to FF)
3. When each key on the set and on remote commander is pressed,
its name is displayed on the remote commander LCD.
Example1: When the
>
Remote commander LCD display
000
FF
**: AD value of the remote commander key
(hexadecimal 00 to FF)
Example2: When the
>
pressed:
Remote commander LCD display
000
rFF
**: AD value of the remote commander key
(hexadecimal 00 to FF)
4. When all the keys on the set or on the remote commander are
considered as OK, the following displays are shown for and 3-
color info-LED light in green.
Example1: When the keys on the set are considered as OK:
Remote commander LCD display
888
SET OK **
**: AD value of the remote commander key
(hexadecimal 00 to FF)
Example2: When the keys on the remote commander are con-
sidered as OK:
Remote commander LCD display
888
RMC OK **
**: AD value of the remote commander key
(hexadecimal 00 to FF)
5. When all keys were checked or if the upper panel is opened,
the key check mode quits and the test mode (display check
mode) comes back and 3-color info-LED returns to blinking
in orange.
MZ-E510
[DISPLAY]
key on the remote com-
**
key on the set is pressed:
**
key on the remote commander is
**
13
Advertisement
Table of Contents
