Table of Contents
Advertisement
04
About the Home Menu
This receiver's Home Menu (HOME MENU) can be used to make various settings and to check and adjust items
that have been set.
! With factory default settings, the Home Menu screen will be output from all HDMI output terminals
and displayed on any TV connected via HDMI cable. You can change where the screen is output in the
MAIN/HDZONE
(page 108
) and HDMI output
1
Press MAIN RECEIVER to switch the remote control to the receiver operation mode.
2
To display the Home Menu screen, press HOME MENU on the remote control.
1. MCACC PRO
2. MCACC Data Check
3. Data Management
4. System Setup
5. Network Information
6. Operation Mode Setup
Exit
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
The top level in the Home Menu is as shown below. Refer to the respective explanations to set, check and adjust
as necessary.
! MCACC PRO – Use this to make automatic settings and detailed manual settings for the surround sound. For
details, see
Making receiver settings from the MCACC PRO menu
! MCACC Data Check – This displays the MCACC PRO measurement results. Use it to check the MCACC
memory. For details, see
Checking MCACC Data
! Data Management – Use this to manage the data in the MCACC memory. For details, see
on
page 99
.
! System Setup – Use this to make various settings related to this system. For details, see
tings from the System Setup menu
on
page 102
! Network Information – The setting status of the network-related items can be checked. For detail, see
Checking the Network Information
on
page 106
! Operation Mode Setup – Use this to select this receiver's operation mode. For details, see
Setup
on
page 51
.
(page 83
) settings.
HOME MENU
A/V RECEIVER
Return
on
page 94
.
on
page 98
.
Data Management
Making receiver set-
.
.
Operation Mode
52
Basic Setup
Advertisement
Table of Contents
