Table of Contents
Advertisement
04
Operable settings/items
Descriptions
Other functions
INPUT SELECT (INPUT SELECTOR)
Switches the input.
VOLUME +/–, MUTE
Use to set the listening volume.
Selects your favorite listening modes.
LISTENING MODE
PQLS
Plays using the PQLS function.
PHASE (Phase Control)
Plays with phase shifting in the low range corrected.
Switches the input to ADAPTER PORT and plays compressed sound
SOUND RETRIEVER AIR
with high sound quality.
iPod iPhone iPad DIRECT CON-
Switches the input to iPod/USB and sets the mode allowing operation
TROL
from the iPod.
4
When you're finished, press RETURN.
You will return to the Home Menu.
Changing the OSD display language (OSD Language)
The language used on the Graphical User Interface screen can be changed.
! The explanations in these operating instructions are for when English is selected for the GUI screen.
! The OSD display is only displayed when the receiver's HDMI OUT 1 terminal and the TV's HDMI input are
connected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front
panel display while performing the various operations and making settings.
1
Press u STANDBY/ON to switch on the receiver and your TV.
Make sure that the TV's video input is set to this receiver (for example, if you connected this receiver to the VIDEO
jacks on your TV, make sure that the VIDEO input is now selected).
2
Press
on the remote control, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
3
Select 'System Setup' from the Home Menu.
4
Select 'OSD Language' from the System Setup menu.
5
Select the desired language.
6
Select 'OK' to change the language.
The setting is completed and the System Setup menu reappears automatically.
Changing the TV format setting
If the Graphical User Interface screen is not displayed correctly, it may be that the TV system is set incorrectly for
your country or region.
1
Switch the receiver into standby.
2
While holding down ENTER on the front panel, press u STANDBY/ON.
The display shows RESET c NO d.
3
Use TUNE i/j to select PAL/NTSC c PAL d, and then use PRESET k/l to select PAL or
NTSC.
Page
Changing the frequency step
If you find that you can't tune into stations successfully, the frequency step may not be suitable for your country/
40
region. Here's how to switch the setting:
40
1
Switch the receiver into standby.
47
2
While holding down ENTER on the front panel, press u STANDBY/ON.
59
The display shows RESET c NO d.
50
3
Use TUNE i/j to select FREQ STEP c 9k d, and then use PRESET k/l to select 9k or 10k.
46
41
About the Home Menu
This receiver's Home Menu (HOME MENU) can be used to make various settings and to check and adjust items
that have been set.
! The OSD display is only displayed when the receiver's HDMI OUT 1 terminal and the TV's HDMI input are
connected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front
panel display while performing the various operations and making settings.
%
To display the Home Menu screen, press
HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
The top level in the Home Menu is as shown below. Refer to the respective explanations to set, check and adjust
as necessary.
! Advanced MCACC – Use this to make automatic settings and detailed manual settings for the surround
sound. For details, see
Making receiver settings from the Advanced MCACC menu
! MCACC Data Check – Use this to check the MCACC memory. For details, see
80.
! Data Management – Use this to manage the data in the MCACC memory. For details, see
on
page
80.
! System Setup – Use this to make various settings related to this system. For details, see
tings from the System Setup menu
! Network Information – The setting status of the network-related items can be checked. For detail, see
Checking the Network Information
! Operation Mode Setup – Use this to select this receiver's operation mode. For details, see
Setup
on
page
37.
38
on the remote control, then press
HOME MENU
A/V RECEIVER
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
5. Network Information
6. Operation Mode Setup
Exit
Return
on
Checking MCACC Data
on
page
83.
on
page
86.
Basic Setup
page
76.
on
page
Data Management
Making receiver set-
Operation Mode
- Quick Links:
- Resetting the System
Hide quick links:
Advertisement
Chapters
Table of Contents
