Table of Contents
Advertisement
04
Operation Mode Setup
This receiver is equipped with a great number of functions and settings. The Operation Mode feature is provided
for users who find it difficult to master all these functions and settings.
One of two settings can be selected for the Operation Mode: Expert and Basic.
! The OSD display is only displayed when the receiver's HDMI OUT terminal and the TV's HDMI input are con-
nected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front
panel display while performing the various operations and making settings.
Important
! Many of the settings and functions cannot be selected when the Operation Mode is changed to Basic.
1
Press
on the remote control, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
2
Select 'Operation Mode Setup' from the Home Menu.
3
Select the Operation Mode setting you want.
! Expert (default) – Users can set all the functions by themselves.
! Basic – Only certain basic settings can be operated. The settings that can be operated are shown below. They
can be set as necessary by referring to the operating instructions.
Operable settings/items
Descriptions
HOME MENU
Full Auto MCACC
Makes high precision sound field settings easily.
Input Name
Input names can be changed as desired for easier use.
Inputs not being used are skipped (not displayed).
Input Skip
Software Update
Updates to the latest version of the software.
Network Information
Checks the receiver's IP address.
Audio Parameters
MCACC
Selects your favorite MCACC preset memory.
(MCACC preset)
DELAY
Adjusts the delay time of the overall sound.
(Sound Delay)
S.RTRV
Plays compressed sound with high sound quality.
(Auto Sound Retriever)
DUAL
Dual monaural audio setting.
(Dual Mono)
A.ATT
Decreases the analog input signal level to reduce distortion.
(Analog input attenuate)
V.SB
Creates a virtual surround back channel sound for playback.
(Virtual Surround Back)
V.HEIGHT
Creates a virtual height channel sound for playback.
(Virtual Height)
V.WIDE
Creates a virtual wide channel sound for playback.
(Virtual Wide)
V.DEPTH
Plays with a sound field suited for 3D images.
(Virtual Depth)
Operable settings/items
Other functions
INPUT SELECT (INPUT SELECTOR)
VOLUME +/–, MUTE
LISTENING MODE
PQLS
PHASE (Phase Control)
PHASE (Full Band Phase Control)
iPod iPhone iPad DIRECT
CONTROL
4
When you're finished, press RETURN.
You will return to the Home Menu.
About the Home Menu
This receiver's Home Menu (HOME MENU) can be used to make various settings and to check and adjust items
that have been set.
To display the Home Menu screen, press
Page
45
47
47
101
100
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
73
screens and select menu items. Press RETURN to exit the current menu.
The top level in the Home Menu is as shown below. Refer to the respective explanations to set, check and adjust
as necessary.
73
! Advanced MCACC – Use this to make automatic settings and detailed manual settings for the surround
sound. For details, see
Making receiver settings from the Advanced MCACC menu
73
! MCACC Data Check – Use this to check the MCACC memory. For details, see
94.
73
! Data Management – Use this to manage the data in the MCACC memory. For details, see
on
page
95.
73
! System Setup – Use this to make various settings related to this system. For details, see
tings from the System Setup menu
73
! Network Information – The setting status of the network-related items can be checked. For detail, see
Checking the Network Information
73
! Operation Mode Setup – Use this to select this receiver's operation mode. For details, see
Setup
on
page
48.
73
73
48
Descriptions
Switches the input.
Use to set the listening volume.
Selects your favorite listening modes.
Plays using the PQLS function.
Plays with phase shifting in the low range corrected.
The Full Band Phase Control feature calibrates the frequency-phase
characteristics of the speakers connected.
Switches the input to iPod/USB and sets the mode allowing operation
from the iPod.
on the remote control, then press HOME MENU.
HOME MENU
A/V RECEIVER
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
5. Network Information
6. Operation Mode Setup
Exit
Return
Checking MCACC Data
on
page
97.
on
page
100.
Basic Setup
Page
50
50
57
70
61
61
51
on
page
89.
on
page
Data Management
Making receiver set-
Operation Mode
Advertisement
Table of Contents
