Sharp GX10i User Manual page 62

11.
Select a base tone by pressing
.
When "Confirm Tones" is selected, the syllable
names are played back in the selected tone.
12.
Select "OK", then press
13.
Press or to select "Details Editor", then
press .
14.
Press or to select "Algorithm x", then press
.
15.
Select an algorithm you wish to set by pressing
or , then press
If you do not wish to change the operator, skip to
step 20.
16.
Select an operator you wish to change by pressing
or , then press
The basic note parameter is set in advance.
17.
Select a parameter you wish to change by pressing
or .
or , then press
.
.
.
18.
Press or to change the content of the
parameter.
For details of parameter, see pages 60 to 61.
When you press
back in the selected content of the parameter.
Repeat steps 17 and 18 to change another content of
the parameter.
19.
Press or to select "Setup End", then press
.
If you do not wish to change the effect frequency,
skip to step 22.
20.
Press or to select "Effect Frequency", then
press .
21.
Select the effect frequency you wish to set by
pressing or , then press
22.
Press or to select "Details End", then press
.
23.
Press or to select "Save", then press
Your original tone is registered.
, the syllable names are played
.
Fun & Games
.
62