Table of Contents
Advertisement
Copying and Pasting Notes
You can copy and move a part of a melody to another
position.
Only original ring tones or editable melodies can be
copied or moved.
1.
Perform steps 1 to 7 in "Editing Original Ring
Tones" on page 57.
2.
Press
[Options] to display the Options Menu.
3.
Press
or
to select "Copy" or "Cut", then
press
.
4.
Move the cursor to the first note to be copied or to
be cut and press
5.
Move the cursor to the last note to highlight the area
and press
.
The highlighted area will be saved temporarily in
the memory. If you select "Cut" in step 3, the
highlighted area will be cut.
6.
Press
[Options] to display the Options Menu.
7.
Press
or
to select "Paste", then press
8.
Move the cursor to the point you wish to paste the
notes, then press
Saved notes are pasted.
59
Fun & Games
.
.
Tone Editor
You can make a tone and use it for the original ring
tone.
Up to five types of tones can be registered respectively
for 8 chords and 16 chords.
FM Sound Source
Various types of tones can be composed by combining
the functions that generate one sine wave called an
"Operator". The combination of the operator is called
an algorithm.
The operator acts as the modulator (modulating part) or
the carrier (modulated part) depending on the
algorithm.
• In each operator, various parameters such as multiple
.
or envelope can be set.
• By setting the feedback to the specified operator,
wider tone ranges can be created.
(M 3-4)
Advertisement
Table of Contents
