Sharp GX10i User Manual page 35

To select the mode
1.
Press [Options] before step 2 in "Taking
Pictures" on page 34 to display the Options Menu.
2.
Press or to select "Select Mode", then press
.
3.
Select the mode by pressing
.
Note
• Vertical stripes may be reflected to a picture by light
source. Change the mode in this case.
Retaking Pictures
After steps 1 and 2 in "Taking Pictures" on page 34,
press [Back].
Further shooting is available.
Note
• The Digital Camera Uses a C-MOS Sensor. Although
this camera has been manufactured to the highest
specification, some pictures may still appear too
bright or too dark.
• If the phone has been left in a warm place for a long
time before taking or registering a picture, the
picture quality may be poor.
35 Camera
or , then press
In the Case of No Available Memory
When the number of pictures that can be taken becomes
5 or less, or when the remaining capacity becomes 27.5
Kbytes (when "Medium" is selected as the picture size)
or less, " " will appear on screen. The screen returns
to step 2 in "Taking Pictures" on page 34. The number
of pictures that can be taken is displayed in the upper
left of the screen. (The number of pictures that can be
taken is approximate.)
When you run out of picture capacity, see "Deleting
Pictures/Images" on page 42 and erase unneeded
pictures.
Meanings of Indicators in Camera Mode
Delay timer indicator (p. 36)
: Whilst the timer setting is on.
Picture brightness indicators (p. 36)
: Bright
:
: Normal
:
: Dark
Picture size indicators (p. 34)
Large:
Medium (default): 120 × 160 dots
Small:
288 × 352 dots
60 × 80 dots