Utax P-4030i MFP User Manual page 370

Troubleshooting > Troubleshooting
T
Message
The cover is open.
The manufacturer
assumes no
responsibility for
damage caused by a
non-genuine toner.
The slit glass requires
cleaning.
This memory is not
formatted.
This user account is
locked out.
Toner is empty.
Toner is low. (Replace
when empty.)
U
Message
Unknown Toner
Installed. PC
W
Message
Warning low memory.
Waste toner box is full.
Waste toner box is not
installed.
Y
Message
You cannot use this box.
Checkpoints
Is the top cover of the document
processor open?
Is there any cover which is open?
Is the installed toner container our
own brand?
—
Is the removable memory formatted
by this machine?
—
—
—
Checkpoints
Does the installed toner container's
regional specification match the
machine's?
Checkpoints
—
Is the waste toner box full?
—
Checkpoints
—
10-22
Corrective Actions
Close the document processor
cover.
Close the cover indicated on the
screen.
We will not be liable for any damage
caused by the use of third party
supplies in this machine. If you want
to continue, press [Next].
Clean the slit glass using the
cleaning cloth supplied with a soft
cloth.
Perform [Format] on this machine.
Contact administrator.
Job is canceled. Press [End].
Replace the toner container.
It is almost time to replace the toner
container. Obtain a new toner
container.
Corrective Actions
Install the specified container.
Corrective Actions
Cannot start the job. Try again later.
Replace the waste toner box.
The waste toner box is not installed
correctly. Set it correctly.
Corrective Actions
You cannot use the specified box.
Job is canceled. Press [End].
Reference
Page
―
―
page 10-2
page 7-13
―
page 10-5
―
Reference
Page
—
Reference
Page
—
page 10-8
page 10-8
Reference
Page
—