Utax P-4030i MFP User Manual page 320

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
3
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Model Name
P-4030i MFP/P-4035i
MFP
P-5035i MFP
P-6035i MFP
3
Press [User Login Setting], [
System Menu/Counter.
Group Authorization Set. - Group List
Others
Menu
Configure the settings.
Enter the group ID.
Add - Group ID
(1 - 4294967295)
Cancel
1
Enter the group ID and press [Next].
2
Enter the group name and press [Next].
NOTE
Refer to Character Entry Method on page 11-12
3
Select the group access privileges and press [Next].
4
Check the settings and change or add information as needed.
Register the group.
Press [Save]. A new group is added on the group list.
Login User Name
4000
5000
6000
], [Group Authorization], [Group List] and then
10:10
1/1
End
10:10
Next >
for details on entering characters.
9-22
Login Password
4000
5000
6000
.
[ ]