Utax P-4030i MFP User Manual page 304

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
2
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and press [Login].
The factory default login user name and login password are set as shown below.
Model Name
P-4030i MFP/P-4035i
MFP
P-5035i MFP
P-6035i MFP
3
Press [User Login Setting], [Local User List] and then
Enter the user information.
Add - User Name
User A
ABC A/a
Cancel
When the entry is complete, press [Next] and proceed to the next step. The table below
explains the user information to be registered.
Item
User Name Enter the name displayed on the user list (up to 32 characters).
Login User Name Enter the login user name to login (up to 64 characters). The same login user
name cannot be registered.
Access Level Select "Administrator" or "User" for user access privileges.
NOTE
Refer to the Character Entry Method (page 11-11)
Login User Name
4000
5000
6000
Input:
6
Limit:
32
Del.
Next >
Descriptions
9-6
Login Password
4000
5000
6000
.
[ ]
for details on entering characters.