Utax P-4030i MFP User Manual page 117

Preparation before Use > Loading Paper
When you load envelopes or cardstock in the multi purpose tray
Switching to Envelop Mode (P-4030i MFP/P-4035i MFP)
To print on an envelope, follow the procedure below to switch to envelope mode.
NOTE
When the printing on envelopes is completed, return the envelope lever to its original position (at the bottom).
1
2
3
Open the rear cover.
Raise the envelope lever.
CAUTION
The fuser unit inside the machine is hot. Do not touch it with your hands as it may
result in burn injury.
Close the rear cover.
3-20