Installation Diagram Of Indoor And Outdoor Units - Toshiba RAS-24NKHP-E Service Manual

8-2. Installation Diagram of Indoor and Outdoor Units

6 Bio-enzyme & Gingko filter
5 Sasa-Zeolite Vitamin C filter
Bef ore installing the
wireless remote control
• With the remote control cover
open, load the batteries supplied
correctly, observing their polarity.
2
Wireless remote control
Cover
3
Batteries
8 Pan head wood screw
4 Remote control holder
2
Wireless remote control
Vinyl tape
Apply after carrying
out a drainage test.
− 31 −
FILE NO. SVM-06009
For the rear left and left
piping
Hook
1 Installation
plate
Insert the cushion between
the indoor unit and wall,
and lift the indoor unit for
better operation.
Do not allow the drain
hose to get slack.
Shield
pipe
Make sure to run the drain
hose sloped downward.
be connected the left, rear
left, rear, right or bottom.
Right
Rear
Insulate the refrigerant
pipes separately with
insulation, not together.
Saddle
Extension drain hose
(Not available,
provided by installer)
Wall
Cut the piping
hole sloped
slightly
Rear
left
Left
Bottom
6 mm thick heat resisting
polyethylene foam