Channel Setup; To Return Setup Parameters To Their Initial Defaults; To Configure Channel Setup Settings - Casio FX-CG20 AU User Manual

6. After you configure a setup, you can use the function key operations described below to
start sampling or perform other operations.
• 1(START) ..........Starts sampling using the setup (page
• 2(MULTI) ...........Starts MULTIMETER mode sampling using the setup (page
• 3(MEMORY) ......Saves the setup (page
• 4(PROGRAM) ....Converts the setup to a program (page
• 5(GRAPH) .........Graphs data sampled by the Data Logger, and provides tools for
• 6(ABOUT) ..........Displays version information about the Data Logger unit that is

• To return setup parameters to their initial defaults

Perform the following procedure when you want to return the parameters of the setup in the
current setup memory area to their initial defaults.
1. While the Advanced Setup menu (page
2. In response to the confirmation message that appears, press 1(Yes) to initialize the
setup.
• To clear the confirmation message without initializing the setup, press 6(No).
k Channel Setup
The Channel Setup screen shows the sensors that are currently assigned to each channel
(CH1, CH2, CH3, SONIC, Mic).

• To configure Channel Setup settings

1. While the Advanced Setup menu (page
• This displays the Channel Setup screen.
2. Use the f and c cursor keys to move the highlighting to the channel whose setting
you want to change.
ε
-9
Using Advanced Setup
ε
-23).
analyzing graphs (page
currently connected to the calculator.
ε
-8) is on the display, press g(Initialize).
ε
-8) is on the display, press b(Channel).
Currently selected channel
ε
-30).
ε
-24).
ε
-27).
ε
-35).
Channel Setup Screen