Configuring the Calculator Setup
To change the calculator setup
1. Press (SETUP) to display the setup menu.
2. Use and to scroll the setup menu, and then input the number
displayed to the left of the item whose setting you want to change.
Items and Available Setting Options
" " indicates the initial default setting.
Input/Output
LineI/DecimalO
formula input and calculation result output.
Angle Unit Degree ; Radian; Gradian
radian or gradian as the angle unit for value input and calculation result
display.
Number Format
result.
Fix (FIX): The value you specify (from 0 to 9) controls the number of
decimal places for displayed calculation results. Calculation results are
rounded off to the specified digit before being displayed.
Example: 1007(≈)*
Sci (SCI): The value you specify (from 0 to 9) controls the number of
significant digits for displayed calculation results. Calculation results are
rounded off to the specified digit before being displayed.
Example: 17(≈)*
Norm: Displays calculation results in exponential format when they fall
within the ranges below.
Norm 1: 10
Example: 1200(≈)*
* Pressing (≈) instead of after inputting a calculation will display
the calculation result in decimal form.
Fraction Result ab/c; d/c
improper fraction for display of fractions in calculation results.
Complex
polar coordinates for Equation Mode solutions.
Note: An indicator is displayed at the top of the screen while
selected for the Complex setting.
Statistics On; Off
(frequency) column in the Statistics Mode Statistics Editor.
Spreadsheet
Auto Calc: Specifies whether or not formulas should be re-calculated
automatically.
On ; Off
Show Cell: Specifies whether a formula in the edit box should be
displayed as it is or as its calculation result value.
Formula : Displays the formula as it is.
Value: Displays the calculation result value of the formula.
Equation On ; Off
numbers in solutions output in the Equation Mode.
MathI/MathO ; MathI/DecimalO; LineI/LineO;
Specifies the format to be used by the calculator for
Specifies the number of digits for display of a calculation
1.4286 × 10
-2
> | |, | |
;
Specifies whether or not to display a Freq
For configuring Spreadsheet Mode settings.
Enables or disables auto re-calculation.
Specifies whether or not to use complex
14.286 (Fix 3)
-1
(Sci 5)
, Norm 2 : 10
10
10
-3
5 × 10
(Norm 1), 0.005 (Norm 2)
Specifies either mixed fraction or
Specifies either rectangular coordinates or
is displayed while
6
Specifies degree,
-9
10
> | |, | |
10
is selected.
is