Drawing A Dynamic Graph Locus - Casio FX-CG20 AU User Manual

Example
1 m Dyna Graph
2 !3(V-WIN)1(INITIAL)J
3 !m(SET UP)c2(Stop)J
4 5(BUILT-IN)c1(SELECT)
5 !f(FORMAT)b(Black)
6 4(VAR)cwbw-bw
7 2(SET)cwfwbwJ
8 3(SPEED)3( )J
9 6(DYNA)
Repeats from 1 through 4.
1 1
4 4
k Drawing a Dynamic Graph Locus
Turning on the Dynamic Graph locus setting on the Setup screen lets you overlay a graph
drawn by changing the coefficient values.
1. From the Main Menu, enter the Dyna Graph mode.
2. Configure V-Window settings.
3. On the Setup screen, select "On" for "Locus".
4. Use the cursor keys to select the function type on the built-in function type list.
5. Input values for coefficients, and specify which coefficient will be the dynamic variable.
6. Specify the start value, end value, and increment.
7. Specify "Normal" for the draw speed.
8. Draw the Dynamic Graph.
Use Dynamic Graph to graph
coefficient A changes from 2 through 5 in increments of 1. The graph is
drawn 10 times.
y x
= A ( – 1) 2 – 1, in which the value of
2 2
→ →
← ←
3 3
→ →
← ←
5-41
↓ ↑ ↓ ↑