To Specifying The Color And Line Type Of A Particular Object; To Construct A Perpendicular Bisector; Using The Construct Menu - Casio FX-CG20 AU User Manual

Hide thumbs Also See for FX-CG20 AU:

Table of Contents

4. To apply the settings you configure, return to the dialog box in step 2 of this procedure and

then press J.

u To specifying the color and line type of a particular object

1. Use the procedure under "Selecting and Deselecting Objects" (page 14-19) to select the

object whose color and/or line type you want to specify.

2. Press !f(FORMAT).

• This displays a dialog box that shows supported settings, which depend on the

composition of the selected object.

3. Perform the procedure starting from step 3 under "To specify the color and line type of all

the displayed objects" (page 14-21).

k Using the Construct Menu

Press 4(Construct) to display the Construct menu. You can use the Construct menu to

construct various types of geometric objects, such as a perpendicular bisector, parallel, angle

bisector, etc.

u To construct a perpendicular bisector

1. Draw a line segment and select it.

2. Perform the following operation: 4(Construct) – 1:Perp Bisector.

• This will draw the perpendicular bisector of the line segment you selected.

You can perform a perpendicular bisector construct operation while a single line segment, one

side of a polygon, or two points are selected on the screen.