Drawing A Dynamic Graph - Casio FX-9750G plus User Manual

13-3 Drawing a Dynamic Graph

184
Downloaded from www.Manualslib.com
The following is the general procedure you should use to draw a Dynamic Graph.
1. Select or input a function.
2. Define the dynamic coefficient.
• This is a coefficient whose value changes in order to produce the different
graphs.
• If the dynamic coefficient is already defined from a previous operation, you can
skip this step.
3. Assign values to each of the coefficients of the function.
4. Specify the range of the dynamic coefficient.
• If the range of the dynamic coefficient is already defined from a previous
operation, you can skip this step.
5. Specify the speed of the draw operation.
• If the speed is already defined from a previous operation, you can skip this
step.
6. Draw the Dynamic Graph.
u u u u u To set Dynamic Graph conditions
Example To use Dynamic Graph to graph
A changes from 2 to 5 in increments of 1
Use the following View Window parameters.
Xmin
Xmax =
Xscale =
1. Input the function you want to graph. Here we will edit a built-in function to
input our function.
5(B·IN)
c1(SEL)
manuals search engine
= – 6.3 Ymin = – 3.1
6.3 Ymax =
1 Yscale =
y x
= A ( –1) –1 as the value of
2
3.1
1
1 2 3 4 5 6