Sony MAP-S1 Operating Instructions Manual page 9

Unit (back)
 Wireless LAN antenna
If you use the wireless network function,
set the antenna as shown in the
illustration.
 LAN connector
Connect network equipment with
network cable (not supplied) (page 25).
  (USB REAR) port
Connect a computer or WALKMAN®
which is compatible with High-
Resolution Audio. Use the USB cable (not
supplied) (page 17). If you connect a
WALKMAN® to the unit, use an optional
High-Resolution Audio USB Adaptor WM-
PORT Cable* (not supplied) and the USB
cable (not supplied).
You can also use this as a USB-DAC.
* Optional High-Resolution Audio USB Adaptor
WM-PORT Cable can be ordered from your
nearest Sony dealer.
 DAB ANTENNA
Connect the DAB antenna.
 AM ANTENNA
Connect the AM loop antenna.
 FM ANTENNA
Connect the FM antenna.
Note
 Find a location and an orientation that provide
good reception, and then fix the antennas to a
stable surface (window, wall, etc.).
 Keep the antennas away from the unit, power
cord and other AV components to avoid picking
noise.
 Secure the end of the FM lead antenna with
adhesive tape.
To prepare the AM loop antenna
1
Fold the antenna stand as illustration.
Side view
Fold both parts of the
stand.
9 GB