Rear Control Panel - Lincoln Electric invertec v205-t Operator's Manual

B-2

REAR CONTROL PANEL

WARNING
• I1: Off/On switch turns on the electric power to
the welder. It has two positions, "O" off, and
"I" on.
------------------------------------------------------------------------
* With "l1" in the "I" (ON) position, the welding
machine is operational and there is voltage between
the positive (+) and negative (-) sockets in stick
welding. In TIG, the welding process needs a trigger
closure command at the remote control connec-
tion.(Usually via an Arc Start Switch or Foot Amptrol)
* The welder is connected to the mains supply even if
the "I1" switch is in the "O" position, and therefore
there are electrically live parts inside the power
source. Carefully follow the instructions given in this
manual.
FIGURE B.1
* 1 : Supply cable
* 2 : Gas attachment
OPERATION
(FIGURE B.1)
V205-T AC/DC TIG
B-2