JVC KD-X220 Instruction Manual page 12

AUDIO SETTINGS
EQ SETTING
EQ PRESET FLAT / HARD ROCK / JAZZ / POP / R&B / TALK / USER1 / USER2 /
VOCAL BOOST / BASS BOOST / CLASSICAL / DANCE: Selects a preset
equalizer.
1 USER1/ USER2: Select a preset name.
EASY EQ
2 Adjust your own sound settings.
SUB.W SP * *
1 2
:
SUB.W * *
1 3
:
BASS LVL:
MID LVL:
TRE LVL:
1 USER1/ USER2: Select a preset name.
PRO EQ
2 BASS / MIDDLE / TREBLE: Select a sound tone.
3 Adjust the sound elements of the selected sound tone.
BASS Frequency: 60/ 80/ 100/ 200 HZ
Level:
Q:
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 KHZ
Level:
Q:
TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 KHZ (Default: 10.0 KHZ
Level:
Q:
10
Default: XX
00 to +06 (Default: 03
–08 to +08
–06 to +06
–06 to +06
–06 to +06
( Default: 80 HZ
–06 to +06
Q1.0/ Q1.25/ Q1.5/ Q2.0
(Default: 1.0 KHZ
–06 to +06
Q0.75/ Q1.0/ Q1.25
–06 to +06
Q FIX
AUDIO
BASS BOOST +01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced
sound at low volume. ; OFF: Cancels.
SUB.W LEVEL * 1 SPK-OUT *
PRE-OUT *
00
00
00
SUB.W *
3
ON / OFF: Turns on or off the subwoofer output.
00)
SUB.W LPF * 1
THROUGH: All signals are sent to the subwoofer. ; LOW 55HZ /
MID 85HZ / HIGH 120HZ: Audio signals with frequencies lower than
55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.
SUB.W PHASE * 1
REVERSE (180°)/ NORMAL (0°): Selects the phase of the subwoofer
output to be in line with the speaker output for optimum performance.
00
(Selectable only if a setting other than [THROUGH] is selected for
Q1.0)
[SUB.W LPF].)
00
FADER R06 — F06 (00): Adjusts the front and rear speaker output balance.
Q1.25)
BALANCE * 4
L06 — R06 (00): Adjusts the left and right speaker output balance.
* 1
00
Displayed only when [SUB.W] is set to [ON].
* 2
Q FIX) Displayed only when [SPK/PRE OUT] is set to [SUB.W/SUB.W]. ( 11)
* 3
Displayed only when [SPK/PRE OUT] is set to [REAR/SUB.W] or [SUB.W/SUB.W]. ( 11)
* 4
This adjustment will not affect the subwoofer output.
2
00 to +06 (+03): Adjusts the output level of the
subwoofer connected via speaker lead. ( 17)
3
–08 to +08 (00): Adjusts the output level of the
subwoofer connected to the lineout terminals (REAR/
SW) through an external amplifier. ( 17)