Ani-Id - Automatic Number Id; Dtmfst - Dtmf Tone Of Transmit Code; Code - Signal Code; Sc-Rev - Scanner Resume Method - Baofeng UV-5R Documentation

15 ANI-ID - Automatic Number ID

Key
2
0
In some versions of the firmware your options may be restricted to ON and OFF.
15 ANI-ID - Automatic Number ID
This can only be set via Computer Linked programming.
Values
Can only be edited
with software
16 DTMFST - DTMF tone of transmit
code
Selects if you should send your S-CODE(DT) or ANI code with the PTT-ID.
Key
1
2
3
0
You cannot set DTMFST while in channel/memory mode.
17 S-CODE - Signal Code
S-CODE sets your transceiver to one of the fifteen(15) group ID codes. The actual ID
codes are only settable from a computer.
Values
1 - 15
You cannot set S-CODE while in channel/memory mode.

18 SC-REV - Scanner Resume Method

Sets the behaviour of the scanner upon finding active frequencies.
Appendix B. Menu definitions
Values Notes
Chinese
CHI
OFF
Notes
Values Notes
S-CODE only
DT-ST
ANI code onlyANI-
ST
Both
DT+ANI
OFF
Notes
Baofeng UV-5R
Default value
Transmitted when AL-MOD=CODE
and the ALARM is triggered
Default value
80808
Determines when DTMF Side Tones can
be heard from the transceiver speaker.
Default value
DT+ANI
Default value
1
Side Tones are
heard only from
manually keyed
DTMF codes
Side Tones are
heard only from
automatically
keyed DTMF
codes
All DTMF Side
Tones are heard
No DTMF Side
Tones are heard
53