Dcs - Baofeng UV-5R Documentation

The (Chinese) Radio Documentation Project
2.
Enter
3.
Press
4. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad.
5.
Press
6.
Enter
7.
Press
8. Enter desired CTCSS sub-tone frequency in hertz on the numeric keypad. Make
sure it's the same frequency as that you entered for receiver CTCSS.
9.
Press
10. Press
To turn CTCSS off, follow the same procedure but set it to off with the
of selecting a CTCSS sub-tone frequency.
For more information see the section called "11 R-CTCS - Receiver CTCSS" and the
section called "13 T-CTCS - Transmitter CTCSS" in Appendix B, Menu definitions.

DCS

DCS is set with menus 10 R-DCS and 12 T-DCS.
For a complete list of available DCS codes, see Table C.1, "DCS Codes" in Appendix C,
Technical specifications.
Procedure 8.2. DCS setup how-to
1.
Press the
2.
Enter
3.
Press
4. Enter desired DCS code on the numeric keypad.
5.
Press
6.
Enter
7.
Press
28
on the numeric keypad to get to receiver CTCSS.
to select.
to confirm and save.
on the numeric keypad to go to transmitter CTCSS.
to select.
to confirm and save.
to exit the menu system.
key to enter the menu.
on the numeric keypad to get to receiver DCS.
to select.
to confirm and save.
on the numeric keypad to go to transmitter DCS.
to select.
key instead
Selective calling