Baofeng UV-5R Programming Manual

To program repeater 146.985, minus offset, 100 Hz tone, low power level, into Channel#010
Turn on radio.
If in Memory Mode switch to VFO Mode (VFO/MR)
Select 5 KHz Step - (MENU + 1 + MENU) (Use the
Enter
Press [MENU] + 2 + [MENU]
Press [MENU] + [EXIT]
Press [MENU] + 5 + [MENU]
Press [MENU] + [EXIT]
Press [MENU] + 1 + 3 + [MENU]
Press [MENU] + [EXIT]
Press [MENU] + 2 + 7 + [MENU]
Press [MENU] + [EXIT]
Enter
Press [MENU] + 2 + 7 +
[MENU] + [MENU] + [EXIT]
Baofeng UV-5R
146.985
146.385
Return to Memory Mode (VFO/MR)
key for 5K) (MENU + EXIT)
The receive frequency
Use the key to select Low Power
To accept and exit
Use the key to select Wide Bandwidth
To accept and exit
Use the key to select 100 Hz Tone
To accept and exit
Enter 010 or Use the
This stores the Receive Frequency
Radio prompts that REC FREQ has been stored
The transmit frequency
Radio prompts that TX FREQ has been stored
key to select 010