DWL-3200AP User's Manual
Connecting PoE (Power over Ethernet)
D-Link Systems, Inc.
Step 1
Connect one end of an Ethernet cable (included with your package) to
the LAN port on the DWL-3200AP and the other end of the Ethernet
cable to the port labeled P+DATA OUT on the PoE base unit.
Connect another Ethernet cable from the
Step 2
base unit to your router/switch, using a straight through cable, or to
a PC, using a crossover cable.
Attach the power adapter to the connector labeled POWER IN on
Step 3
the PoE base unit. Attach the power cord to the power adapter and
into an electrical outlet.
Getting Started
DATA IN
port on the PoE
12