D-Link DWL-3200AP User Manual page 51

DWL-3200AP User's Manual
Device Configuration > Wireless
Beacon Interval
(20~1000):
DTIM (1~255): DTIM (Delivery Traffic Indication Message) is a countdown informing
Fragment
(256~2346):
RTS Length
(256~2346):
Tx Power:
Auto Channel:
*"Maximum wireless signal rate derived from IEEE Standard 802.11g specifications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead
lower actual data throughout rate."
D-Link Systems, Inc.
Beacons are packets sent by an access point to synchronize a
network. Specify the beacon value for the selected device(s) here.
The default value of 100 is recommended.
clients of the next listening window for broadcast and multicast
messages.
Length
This sets the fragmentation threshold (specified in bytes). Packets
exceeding the value set here will be fragmented. The default is 2346.
The RTS value should not be changed unless you encounter
inconsistent data flow. The default value is 2346.
A pulldown menu for selecting the transmit power of the selected
device(s).
Select this option to automatically select the most optimal channel
available for wireless networking.
Using the AP Manager
51