D-Link DWL-3200AP User Manual page 48

DWL-3200AP User's Manual
Device Configuration > General
Device Name(*):
IP address and
Subnet Mask(*):
Gateway:
D-Link Systems, Inc.
When selecting multiple devices for configuration, some options are
unavailable for configuration by default as noted(*) below:
This allows you to change the device name for the selected
access point. You must place a checkmark in the Device Name
box to change the name. This option should only be configured
when one access point is selected for configuration.
If you've selected one device for configuration and you want
to change the IP address of the device, check the IP Address
box. You ca then enter an IP address and Subnet Mask for the
selected access point. This option should only be configurable
when one access point is selected for configuration. To configure
multiple devices with an IP address at one time, please reference
the previous page.
Enter the IP address of your gateway, typically your router
address.
Using the AP Manager
48