Chapter 7: Adding or Replacing Components
Replacing the system board
To replace the system board:
1
Identify your computer case style. For more information, see
your computer case style" on page
2
Open the case by following the instructions in
page
3
Remove all of the add-in cards by following the instructions in
or replacing add-in cards" on page
4
Disconnect the power and data cables from the system board, noting their
locations and orientation. (You will reconnect the cables after you install
the new board.)
5
Remove the thumbscrew using a screwdriver, coin, or your fingers.
182
158.
www.gateway.com
106.
"Opening the case" on
177.
"Identifying
"Adding