Gateway E-4000 User Manual page 13

Component
Power connector
Voltage switch
PS/2 mouse port
PS/2 keyboard port
USB 2.0 ports
Serial port
Icon Description
Plug the power cable into this connector.
Before turning on your computer, make sure that this
switch is in the correct position for the correct voltage. The
switch is preset at the factory with the correct voltage for
your area.
In the United States, the utility power is supplied at a
nominal 115 volts at 60 Hz. The power supply should
always be set to this when your computer is operating in
the United States. In other areas of the world, such as
Europe, the utility power is supplied at 230 volts at 50 Hz.
If your computer is operating in an environment such as
this, the voltage switch should be moved to 230.
Plug a Personal System/2
Plug a PS/2 keyboard into this port.
USB v2.0 Plug USB (Universal Serial Bus) devices (such as a
mouse, keyboard, or printer) into these ports.
Plug a serial device (such as a digital camera) into this
port.
www.gateway.com
Gateway Mid Tower Back
®
(PS/2) mouse into this port.
7