Using The Printer Setting Mode - Epson LQ-300 User Manual

Using the Printer Setting Mode

Your printer has internal settings that control simple functions
such as the page length and character set. These settings take
effect each time you turn on the printer, so they are also called
default settings.
For most users, the factory settings are best, but you can change
these settings if necessary. The table below lists all the settings
you can change.
I
Function
Character table*
Page length
Skip-over-perforation
Auto tear off
Graphic print direction
Software
AGM
Auto line feed
Interface
Bit rate
Parity bit
Data length
EXT/ACK
State reply
* In certain areas, the following character tables are available:
PC437. PC850, PC864, PC437 Greek, PC852, PC853, PC855, PC857,
PC866, PC869, IS0 Latin IT, IS0 8859-7, Code MJK, MAZOWIA, Bulgaria
Note:
Because software settings always override the printer's default
settings, use your software program to control the printer, if possible.
See your software documentation for more information.
2-22 Using the Printer
Options
PC437, PC850, PC860, PC863, PC865,
PC861, BRASCII, Abicomp
11, 12, 8.5, 70/6 inches
On, Off
On, Off
Unidirectional, Bidirectional
ESC/P 2, IBM X24E
On, Off
On, Off
Auto (10 sec. wait), Auto (30 sec. wait),
Parallel, Serial
300, 600, 1200, 2400, 4800, 9600,
19200 bps
None, Odd, Even
7 bit, 8 bit
Disable, Enable
On, Off