Using The Control Panel; Lights And Buttons - Epson LQ-300 User Manual

Using the Control Panel

You can control simple printer operationssuch as line
feeding, form feeding, loading and ejecting paper, and selecting
fontswith the buttons on the control panel. The control panel
lights show the printer's status and the current font.
Lights buttons
and
Pa use light
The orange Pause light is on when the printer stops printing.
Each time you turn on the printer, the light flashes briefly.
When the printer is out of paper, the light flashes and the
beeper sounds three times. The light also flashes when you can
tear off the last sheet of continuous paper at the edge of the
printer cover.
The Pause light goes on and the beeper sounds if an error
occurs.
Font 1 and Font 2 lights
The green Font lights, 1 and 2, indicate the current font setting.
For more about selecting fonts, see page 2-4.
While in the micro adjust mode, the Font lights flash. See
"Adjusting the loading position" on page 2-5.
2-2 Using the Printer