Toshiba SD-H400 Service Manual page 12

1-2-4. KDB Front and Power Switch PC Board
1. Remove the front panel. (Refer to item 1-1-3.)
2. Remove five screws (1), then remove the stay (2).
3. Remove a screw (3) and two flexible cables (4), then
remove the Power switch PC board (5).
4. Remove four screws (6), then remove the KDB front
PC board (7).
6. Remove the three screws (8), then remove the select/
enter button (9).
Screws (3)
Flexible
cable (4)
Power switch
PC board (5)
Select/Enter
button (9)
Flexible
cable (4)
Front panel
Fig. 2-1-12
Screws (1)
Screws (6)
Stay (2)
Screws (8)
KDB front
PC board (7)