Toshiba SD-H400 Service Manual page 11

Hide thumbs Also See for SD-H400:
Table of Contents

Advertisement

1-2-2. Tivo PC Board
Cautions :
• Danger of explosion if battery is incorrectly
replaced.
• Replace only with the same or equivalent type of
battery.
1. Remove the top cover. (Refer to item 1-1-1.)
2. Remove the HDD. (Refer to item 1-1-2.)
3. Remove the front panel. (Refer to item 1-1-3.)
4. Remove the mechanism chassis assembly. (Refer to 1-
1-5.)
5. Remove the rear panel. (Refer to item 1-1-7.)
6. Disconnect three connectors (1).
7. Remove three flexible cables (2).
8. Remove seven screws (3), then remove the tivo main
PC board (4).
Screws (3)
Tivo main
PC board (4)
Flexible
cables (2)
Fig. 2-1-10
Flexible cable (2)
Connectors (1)
1-2-3. Power PC Board
1. Disconnect four connectors (1)
2. Remove a screw (2) and four screws (3), then remove
the power PC board (4).
Connectors (1)
Connector (1)
Screws (3)
Connector (1)
Fig. 2-1-11
Screw (3)
Power PC
board (4)
Screw (2)

Advertisement

Table of Contents
loading

Table of Contents