Message Playback - AT&T E2727B User Manual

Number of messages (or, during
playback, message number cur-
rently playing).
1 4 14
Press to begin or
PLAY/STOP
end message playback.
(PLAY/STOP)
"You have [xx] new
messages and [xx] old
messages"
Message playback begins. See
options at right.
(PLAY/STOP)
Message playback ends.
NOTE: If "F" is flashing in
the message window,
memory is full. You will have to
delete some messages before
new ones can be recored.
NOTE: New (unheard) messag-
es cannot be deleted.
Answering System Operation

Message playback

Press to hear messages. The system
PLAY/STOP
announces the number of messages, then begins play-
back.
If you have new messages, you will hear only the new
messages (oldest first). If there are no new messages,
the system will play back all messages (oldest first).
Announcements
• When playback begins, you will hear the total
number of messages.
• Before each message, you will hear the day and time
it was received.
• After the last message, you will hear "End of mes-
sages". If the system has less than 5 minutes of
recording time left, you will hear time remaining.
Options during playback
• Press button to adjust speaker volume.
VOLUME
• Press to skip to next message (or hold down to
SKIP
speed up message playback).
• Press to repeat message currently playing.
REPEAT
Press twice to hear previous message (or hold down
to slow message playback).
• Press to delete message being played back.
DELETE
• Press to stop playback.
PLAY/STOP
To delete all messages
To delete all messages, press and hold
the phone is idle (not during a call, or during message
playback).
33
while
DELETE